Do diesel trains have gears?

Each motor drives a small gear, which meshes with a larger gear on the axle shaft. This provides the gear reduction that allows the motor to drive the train at speeds of up to 125 mph. Each motor can weigh over 6,600 pounds (3,100 kilograms) and draw more than 700 amps of electrical current.



People Also Ask

Modern locomotives use electric traction instead of gears as electric traction is much more flexible than gears. Diesel fuels generators from the combustion engine and transform the energy using an alternator, which runs the traction motors.

MORE DETAILS

Train brakes. Locomotives are equipped with 2 air brake systems: automatic and independent. The automatic brake system applies the brakes to each locomotive and to each car in the train as well; it is normally used during train operations to slow and stop the train.

MORE DETAILS

Mechanical transmission is the simplest type; it is mainly used in very low-power switching locomotives and in low-power diesel railcars. Basically it is a clutch and gearbox similar to those used in automobiles. A hydraulic coupling, in some cases, is used in place of a friction clutch.

MORE DETAILS

Because high horsepower is required for high-speed operation, the diesel is, therefore, less desirable than the electric for high-speed passenger services and very fast freight operations.

MORE DETAILS

A train engine requires about a hundred litres of fuel to get it started. So it wouldn't be economical if the engine is stopped and started frequently. This apart, if the engine is stopped, the moving parts' lubrication will also come to a halt.

MORE DETAILS

Engines may be left idling to maintain important safety related functions such as maintaining engine temperature, air pressure for the brake system, the integrity of the starting systems, the electrical system and providing heating or cooling to a train's crew and/or passengers.

MORE DETAILS

Engines may be left idling to maintain important safety related functions such as maintaining engine temperature, air pressure for the brake system, the integrity of the starting systems, the electrical system and providing heating or cooling to a train's crew and/or passengers.

MORE DETAILS

Some locomotives collect electricity from overhead cables, while others take power from a third “live” rail on the track. It is very expensive to build the lines or rails that carry the electric current, but electric locomotives are cleaner, quieter, faster, and more reliable than steam or diesel engines.

MORE DETAILS

One locomotive weighs about as much as 108 hippos Tier 4 locomotives weigh a whopping 432,000 pounds — the same as 108 hippos weighing in at 4,000 pounds each. These 6-axle engines have 4,400 traction horsepower and can reach a maximum speed of 70 miles per hour pulling thousands of tons of freight.

MORE DETAILS