How far can a train go on one tank of fuel?

The 2022 CSX system-wide train efficiency metric, as shown above, equals approximately 520 ton-miles per gallon. In other words, CSX trains, on average, can move a ton of freight nearly 520 miles on a gallon of fuel, based on our 2022 revenue ton miles and 2022 fuel use.



People Also Ask

The average fuel consumed per kilo- meter for all passenger and cargo trains is 7.97 L/ km. This value for local, trafficking, railway track laying and maneuvering trains is 7.92 L/km.

MORE DETAILS

Fuel Tank. This huge tank in the underbelly of the locomotive holds up to 5,500 gallons (20,820 liters) of diesel fuel, plus an additional 300 gallons (1,135 liters) of coolant, and 250 gallons (946 liters) of engine oil.

MORE DETAILS

Much depends on the loco type/class/load, I'm sure, since answers range from 7 to 22 hours and 550 to 1650 miles. (Those work out to about . 4 miles per gallon, which is actually a -lot- more than I would have guessed!)

MORE DETAILS

Train engines generate thousands of horsepower and take an hour or more to warm up before they can start pulling rail cars. This is one reason there is reluctance to turn them off. Also, particularly relevant for a locomotive attached to a train, the brakes on the cars in the train do not work without power.

MORE DETAILS

Biodiesel & Renewable Fuels: Traditionally, locomotives have run on petroleum diesel fuel, but railroads are now using renewable diesel and biodiesel blends to power them. Both renewable diesel and biodiesel are made from renewable energy sources and don't rely on fossil fuels.

MORE DETAILS

Federal regulators limit the speed of trains with respect to the signaling method used. Passenger trains are limited to 59 mph and freight trains to 49 mph on track without block signal systems. (See dark territory.)

MORE DETAILS

In the United States, diesel-electric locomotives are usually fueled in one of three manners: at an engine terminal, at fueling terminals along busy mainlines, and by fuel trucks wherever a fuel truck can get to a locomotive at.

MORE DETAILS

One locomotive weighs about as much as 108 hippos Tier 4 locomotives weigh a whopping 432,000 pounds — the same as 108 hippos weighing in at 4,000 pounds each. These 6-axle engines have 4,400 traction horsepower and can reach a maximum speed of 70 miles per hour pulling thousands of tons of freight.

MORE DETAILS

Thus, while drivers may have fewer hours for sleep in between successive work periods, they are likely to sleep more often in a single day and to be awake for correspondingly shorter periods. Relay van workers must also sleep in noisy crew-van carriages that shudder and vibrate along with the movement of the train.

MORE DETAILS

The life expectancy of diesel-electric and electric locomotives is expected to be similar—about 25 years. Both types of motive power are subject to technological obsolescence.

MORE DETAILS

Engines may be left idling to maintain important safety related functions such as maintaining engine temperature, air pressure for the brake system, the integrity of the starting systems, the electrical system and providing heating or cooling to a train's crew and/or passengers.

MORE DETAILS

The Federal Railroad Administration does not currently set any limits on train lengths – and also doesn't regularly track train lengths or their associated risks. That has allowed freight railroad companies to occasionally operate trains up to 8 kilometres (5 miles) long.

MORE DETAILS