How many feet long is a train car?

It would depend upon the length of each train car, of which modern train cars vary in length from 35 feet long to 90 feet long so if we take an average length of 60 feet per car the average length of a 100 car train would be approximately 6,140 feet long with two modern 70 foot long locomotives.



People Also Ask

In each incident, the trains were hauling more than 200 rail cars, were at least 12,250 feet long and weighed over 17,000 trailing tons.

MORE DETAILS

The average freight train consisting of 100 cars and weighing anywhere from 12 million to 20 million pounds takes over a mile to stop in emergency braking. There are brakes on every wheel, but it takes that long for all of those brakes to overcome the momentum of the tremendous weight pushing the train.

MORE DETAILS

A train of 150 cars—the FRA's unofficial definition of a long train—carrying iron ore would run about 3,500 feet long, but an intermodal train of the same number of cars might measure 33,000 feet, according to John Gray, the AAR's senior vice president of policy and economics.

MORE DETAILS

As far as I'm aware, there's no legal limit. Passenger trains do not normally exceed 12 cars (around 900 feet, dependent on rolling stock type), but many are much shorter than this.

MORE DETAILS

The Australian BHP Iron Ore is the longest train ever recorded in history at approximately 4.6 miles (7.353 km). In the Pilbara region of Western Australia, BHP owns and runs the Mount Newman railway. This is a private rail network designed to transport iron ore.

MORE DETAILS

This is probably the closest to the actual dimensions since most cars have 2 levels, plus the Sub-Train and the wheel mechanisms underneath them. However, the scale used during the set is downscaled. According to Wilford, the train is 10 miles long (Three thousand souls stufffed into a ten miles steel tube).

MORE DETAILS

Trains have the right-of-way because they cannot quickly stop for a motorist at crossings or for trespassers on the tracks. The average freight train, traveling at 55 MPH, takes anywhere from 1 to 1½ miles to stop. Traveling at the same speed, the average automobile can stop in only 200 feet.

MORE DETAILS

A 150-car freight train at 50 mph needs 8,000 feet (1 and 1/2 miles) to stop; an 8-car passenger train at 79 mph needs about 6,000 feet (1 and 1/8 miles) to stop.

MORE DETAILS

With high-speed rail, train travel is always faster than driving. In many cases, it's even faster than flying, once you factor in the whole air travel song-and-dance. And if you do need to catch a plane, trains make it easier to get to the airport.

MORE DETAILS

The longest UK train journey is Aberdeen to Penzance. Covering 785 miles, this train journey takes about 13 hours and 20 minutes to complete (give or take a few minutes). It has 36 stops and spends about two hours in total waiting for passengers to embark and disembark at each railway station along the way.

MORE DETAILS

Federal regulators limit the speed of trains with respect to the signaling method used. Passenger trains are limited to 59 mph and freight trains to 49 mph on track without block signal systems. (See dark territory.)

MORE DETAILS

Narrow gauge railroads tend to cost less to build, but may have lower weight limits. Standard gauge lines may cost more initially, but typically weight limits will be higher.

MORE DETAILS

The Trans-Siberian is the longest passenger train in the world and travels across China, Mongolia, and the famous, beautiful Siberia. Have you ever considered cruising over 10,214 km for seven days and 20 hours, crossing two continents and a whopping eight time zones?

MORE DETAILS