How many feet must you stop from the nearest railroad crossing?

Except in cities or towns, whenever any person driving a vehicle approaches a railroad grade crossing under any of the circumstances stated in this section, the driver of the vehicle shall stop within 50 feet but not less than 15 feet from the nearest rail of such railroad, and shall not proceed until he can do so ...



People Also Ask

Stop at least 15 feet, but not more than 50 feet, from nearest rail. Look both ways and listen carefully. Bend forward to see around mirrors and A-pillars.

MORE DETAILS

Also, remember that you would still need 3 or 4 feet of space from any crosswalk and at least one car length of space from an intersection, 15 feet from a fire hydrant, 20 feet from a crosswalk at an intersection, 20 feet from a fire station driveway, 50 feet from a railroad crossing, and as much as 75 feet from a fire ...

MORE DETAILS

Flashing red lights, lowered crossing gates and/or a bell at a railroad crossing indicate that you must stop, at least 15 feet (5 m) from the tracks.

MORE DETAILS

Stop, look and listen – Stop no closer than 15 feet and no farther than 50 feet from the crossing. Open windows and doors, look both ways carefully and look and listen for a train.

MORE DETAILS

The average freight train is about 1 to 1¼ miles in length (90 to 120 rail cars). When it's moving at 55 miles an hour, it can take a mile or more to stop after the locomotive engineer fully applies the emergency brake. An 8-car passenger train moving at 80 miles an hour needs about a mile to stop.

MORE DETAILS

When approaching a crossing, roll down your windows, turn off the radio or air conditioner, and listen for whistles or bells. Never shift gears on the railroad crossing, downshift before you reach it. If you must stop, keep a distance of 15 to 50 feet from the tracks.

MORE DETAILS

Hint:The gaps left among straight rails on a railroad track are that the rails extend in summer. The gap is given to permit this expansion. If no gap is given, the expansion in summer will cause the rails to bend sideways. That will end in train accidents.

MORE DETAILS

The US standard railroad gauge is 4 feet, 8.5 inches (Gauge means width between the two rails). The U.S. federal safety standards allow the standard gauge to vary from 4 ft 8 in (1,420 mm) to 4 ft 9 1/2 in (1,460 mm) for operation up to 60 mph (97 km/h).

MORE DETAILS

Stop at least 15 feet, but not more than 50 feet, from nearest rail. Look both ways and listen carefully. Bend forward to see around mirrors and A-pillars.

MORE DETAILS

Driver Traffic Laws on the Tracks Whenever any person driving a vehicle approaches a railroad grade crossing and signals indicate an approaching train, the driver of such vehicle shall stop within fifteen feet from the nearest rail of such railroad and shall not proceed until he can do so safely.

MORE DETAILS