ADS-B is required in Class A, B and C airspace within U.S. domestic airspace and all land mass regions of the U.S. as defined in 14 CFR 1.1 and it includes the states (contiguous and non-contiguous), U.S. possessions, or territories.
People Also Ask
The regulation 14 CFR 91.225(e) allows aircraft not certificated with an electrical system, including balloons and gliders, not equipped with ADS-B Out to operate within 30 nautical miles of a Class B primary airport—basically, within its Mode C veil—while remaining outside of any Class B or Class C airspace.
The FAA requires ADS-B Out capability in the continental United States, in the ADS-B rule airspace designated by FAR 91.225: Class A, B, and C airspace; Class E airspace at or above 10,000 feet msl, excluding airspace at and below 2,500 feet agl; Within 30 nautical miles of a Class B primary airport (the Mode C veil);
I don't have ADS-B Out, where can I fly? Without ADS-B Out, you can fly in any airspace except the ADS-B rule airspace defined by FAR 91.225 (see above). Note that ADS-B is not required in Class D airspace, or under a Class B or Class C airspace shelf, unless it lies within a Mode C veil.
MSL. DISCUSSION: A VFR flight that departs a Class D airport, cruises in Class E airspace at 7,500 ft.MSL, and arrives at another Class D airport may be made without ADS-B Out equipment installed because ADS-B Out is not required in Class D airspace or Class E airspace below 10,000 ft. MSL.
Such operations shall comply with paragraph (a) of this section. (c) No person may operate an aircraft in the airspace underlying a Class B airspace area designated for an airport or in a VFR corridor designated through such a Class B airspace area, at an indicated airspeed of more than 200 knots (230 mph).