What are the flight codes for pilots?

Alpha, Bravo, Charli, Delta, Echo, Foxtrot, Golf, Hotel, India, Juliett, Kilo, Lima, Mike, November, Oscar, PaPa, Quebec, Romeo, Sierra, Tango, Uniform, Victor, Whiskey, X-ray, Yankee, Zulu. Pilots pronounce numbers similar to regular English, with a few exceptions: The number three (3) is pronounced “tree.”



People Also Ask

A Squawk 7700 indicates an emergency. This can be an emergency of any kind. Pilots may input it into the transponder themselves – or when instructed to do so by ATC. As a result, ground control will know that the aircraft is dealing with a serious issue and needs help.

MORE DETAILS

Code 7600. Code 7600 is the code for a loss of radio. If a pilot's radio goes out during a fight, they can enter 7600 into the transponder. Then they should proceed to their intended airport following a standard landing plan. Pilots should be extra careful and on alert for other aircraft around them in the sky.

MORE DETAILS

Series 20 — Code 2000 is to recognize an aircraft that has not received instructions from the air traffic control units to operate the transponder.

MORE DETAILS

For example, 1200 in the USA means that the flight is flying under Visual Flight Rules (VFR) and is not typically in direct contact with ATC. 1200 is a shared code so you may see many aircraft transmitting it at the same time in a given area.

MORE DETAILS

This notice assigns Code 1202 for use by gliders not in contact with an air traffic control (ATC) facility. The notice also provides general flight characteristics of gliders and some of their limitations.

MORE DETAILS

The 3 Must-Know Aircraft Emergency Squawk Codes For Pilots
  • 7700 – Distress or Urgency Condition. Before we begin discussing emergencies, let's define our terms as listed in the Pilot/Controller Glossary. ...
  • 7600 – Two-Way Radio Communication Failure (NORDO) ...
  • 7500 – Air Piracy (Hijacking or Hostile Acts Onboard)


MORE DETAILS

Squawk 2000: This is the 'conspicuity code' for IFR aircraft that are not assigned a specific code by ATC. Squawk 7700: This is the emergency squawk code, and indicates that the aircraft is in distress and needs priority handling from air traffic control.

MORE DETAILS

Squawking 7500 signifies an aircraft being hijacked and could result in an aircraft being escorted by military forces.

MORE DETAILS

The code is applicable to aircraft responding to and operating over fire suppression operations. It is not to be used for repositioning or during cross-country flights. Pilots may select 1255 on their transponder prior to contacting an air traffic control facility.

MORE DETAILS

The number of “souls” on an aircraft refers to the total living bodies on the plane: every passenger, pilot, flight attendant and crew member, according to Lord-Jones. Pilots often report the number of “souls” when declaring an emergency, she says, so rescuers know the amount of people to search for.

MORE DETAILS

Reserved codes are used in particular situations when an aircraft wants to communicate something to ATC urgently. The most well know of these is the code 7700. This is used to indicate an emergency of any kind.

MORE DETAILS

1200 is a shared code so you may see many aircraft transmitting it at the same time in a given area. In other parts of the world such as Europe, 7000 is used for VFR flights. The most widely recognized squawk codes are the 3 codes which indicate emergency situations.

MORE DETAILS

7000. ICAO. VFR standard squawk code when no other code has been assigned. EASA countries. Code that pilot shall set when not receiving air traffic services, unless otherwise prescribed by the competent authority.

MORE DETAILS

The squawk code 7500 is an emergency code used by pilots to inform ATC of a plane hijacking taking place, which means that the pilots have either been forced to change course or are no longer in control of the aircraft.

MORE DETAILS