Loading Page...

What is Class B vs C airspace?

Class B airspace surrounds the busiest airports from the surface to 10,000 feet MSL. The dimensions of Class B airspace vary depending on the needs of the airport. Class C airspace extends from the surface to 4,000 feet MSL.



People Also Ask

Class C: This is the controlled airspace above 7,500 feet and surrounding major airports. Both IFR and VFR flights are permitted and both require ATC clearance and separation service is to be provided by ATC.

MORE DETAILS

What Is Considered Class B Airspace? Class Bravo (B) airspace is the 2nd most restrictive airspace after Class Alpha (A) airspace. It starts from the ground and extends up to 10,000' Mean Sea Level (MSL.) However, Denver and Atlanta are two exceptions here.

MORE DETAILS

To enter Class C airspace, all aircraft must meet the following requirements: Two-way radio. Mode-C transponder. ADS-B Out device.

MORE DETAILS

Flights. Aircraft within Class B airspace are required to operate in accordance with current IFR procedures. A clearance for a visual approach to a primary airport is not authorization for turbine- powered airplanes to operate below the designated floors of the Class B airspace.

MORE DETAILS

To enter Class B airspace, all aircraft must meet the following requirements:
  • ATC clearance required to enter.
  • Establish and maintain two-way communication prior to entering and while in airspace.
  • Mode C transponder (within 30 nm, up to 10,000 feet msl)
  • Student pilot operations restricted.


MORE DETAILS

You must receive official clearance. Also, pilots must hold a minimum of a private pilot certification to enter Class B airspace.

MORE DETAILS

Class D. Class D airspace is for IFR and VFR flying. An ATC clearance is needed and compliance with ATC instructions is mandatory. Control areas around aerodromes are typically class D and a speed limit of 250 knots applies if the aircraft is below FL 100 (10,000 feet).

MORE DETAILS

Class C Airspace (Mandatory Radar) A shelf area with an outer radius of 10 nautical miles surrounds the core area. It extends from 1200 feet AGL to 4000 feet AGL. The airspace is depicted on charts as 2 concentric magenta circles.

MORE DETAILS

The airspace around the busiest US airports is classified as ICAO Class B, and the primary airport (one or more) for which this airspace is designated is called Class B airport. As of January 2023, there are 37 Class B airports in the United States.

MORE DETAILS

Regardless of weather conditions, an ATC clearance is required prior to operating within Class B airspace. Pilots should not request a clearance to operate within Class B airspace unless the requirements of 14 CFR Sections 91.131, 91.215, and 91.225 are met.

MORE DETAILS

There's one more thing to keep in mind when you're operating in Class B airspace: in general, you need to be at least a private pilot to enter the airspace. Student, sport and recreational pilots can enter specific Class B airspaces, but only after they receive training and an endorsement from an instructor.

MORE DETAILS