For example, according to this video by Mentour Pilot, the threshold for the Boeing 737 is 2.1g (peak recorded load factor) at touchdown, whereas it is 2.6g for A320 according to this source.
People Also Ask
The move away from the MAX name has been a subtle process and Boeing has begun to use the name 737 MAX and 737-8(7 through 10) interchangeably. This way they are transitioning away from the MAX name toward the normal naming convention of modern Boeing aircraft.
This is especially true for the critical aircraft – the Boeing 737-900 which requires a landing length of 6,800 feet under wet conditions and a takeoff length of 9,700 feet under maximum takeoff weight.
What size runway does a 737-800 need? How much runway does a 737-800 need to land? the Boeing 737-900 which requires a landing length of 6,800 feet under wet conditions and a takeoff length of 9,700 feet under maximum takeoff weight.
“If you could book a 737 500, and you find out it's a 737 MAX, technically they don't have to honor your request. … So you don't have a right to specify you are not going to go on a 737 MAX.”
We are fully confident in the safety of the 737 MAX, in the updates, and in the work technicians performed while these planes were on the ground: Updating the plane with the latest FAA-approved flight deck software. Rewiring the aircraft. Opening and inspecting the fuel tanks.
In aviation, the rule of three or 3:1 rule of descent is a rule of thumb that 3 nautical miles (5.6 km) of travel should be allowed for every 1,000 feet (300 m) of descent. For example, a descent from flight level 350 would require approximately 35x3=105 nautical miles.
Idle thrust is adequate for taxiing under most conditions, but you'll need a slightly higher thrust setting to get the aircraft rolling. Allow time for a response after each thrust change before changing the thrust setting again. Normal straight taxi speed should not exceed 20 knots (10 knots in turns).