What should you do at a railway crossing where the warning signal is flashing?
If the lights begin to flash or the bells begin to ring, STOP! A train is coming. You must yield to the train and remain stopped until the lights have stopped flashing and the gates have lifted.
People Also Ask
Red flashing lights and gatesMany crossbuck signs have red lights and bells attached. Some even have gates which cross the traffic lane. If the lights begin to flash or the bells begin to ring, STOP! A train is coming.
It is illegal and dangerous to go around lowered gates or to cross while the lights are still flashing. Some grade crossings do not have gates or flashing lights. When approaching unmarked, or passive, grade crossings, slow down and be prepared to stop. Before you cross, be sure that a train is not coming.
On the levelUnless your vehicle has actually crossed the stop line, you should stop when you see the steady amber lights come on. The amber lights will then change to red flashing lights. You must remain stationary until the lights stop flashing, even if a train has passed you, as another train may be on the way.
Below are some safety tips everyone should keep in mind while near a train track: Red lights indicate a train is approaching from either direction. Never walk around or behind lowered gates at a crossing and do not cross the tracks until the lights have stopped flashing. Stay alert around railroad tracks.
A level crossing is an intersection where a railway line crosses a road, path, or (in rare situations) airport runway, at the same level, as opposed to the railway line crossing over or under using an overpass or tunnel.
Trains can come from either direction. Wait until you can see clearly around the first train in both directions. Never walk around or behind lowered gates at a crossing. Do not cross the tracks until the lights have stopped flashing and it is safe to do so.
No person shall drive any vehicle through, around, or under any crossing gate or barrier at a railroad crossing while such gate or barrier is closed or is being opened or closed. Code 1950, § 46-254; 1956, c. 164; 1958, c. 541, § 46.1-244; 1989, c.