What should you do if a train is approaching?


What should you do if a train is approaching? If the lights begin to flash or the bells begin to ring, STOP! A train is coming. You must yield to the train and remain stopped until the lights have stopped flashing and the gates have lifted. If there are multiple tracks, make sure the train you see isn't hiding another one you don't see.


What must you do before going over a rail crossing?

7 Steps for Safety - Highway-Rail Grade Crossings (Visor Card)
  1. Approach with care. Warn others that you are slowing down. ...
  2. Prepare to stop. ...
  3. Look both ways and listen carefully. ...
  4. If it won't fit, don't commit. ...
  5. Look again. ...
  6. Cross tracks with care. ...
  7. Keep going once you start, even if lights start to flash or gates come down.


What not to do on the train?

Don't Put Your Luggage on the Seats Just because there's an empty seat next to you, don't use that for your luggage. There are overhead bins for this reason and the train conductor will remind you if you don't store your luggage above.


When approaching a railway crossing it is important to consider what?

Steps for Navigating Crossings Stop, look both ways, and listen. Know that trains always have the right of way. Don't stop on the tracks. Make sure you have room to get across.


What is the best advice for crossing a railroad track?

When you need to cross train tracks, go to a designated crossing, look both ways, and cross the tracks quickly, without stopping. Remember it isn't safe to stop closer than 15 feet from a rail. ALWAYS EXPECT A TRAIN! Freight trains do not follow set schedules.


Will a train stop if it sees you?

By the time a train operator sees you, it is too late to stop the train in time. An oncoming train is moving faster and is closer to you than it appears. Similar to an airplane traveling at 150 mph that appears to float onto the runway, it's hard to determine a train's speed and distance from you.


How do you stay safe around a train?

Ride Safe: Make the most important stop of your day.
  1. 1) Look both ways. Always expect a second train! ...
  2. 2) Take crosswalks, not shortcuts. Trains will always have the right of way, so pay attention to traffic signals. ...
  3. 3) Headphones off, screens down. ...
  4. 4) Stay behind the yellow line. ...
  5. 5) Bike smart, ride safe.


Is it safe to cross train tracks?

The only safe place to cross railroad tracks is at a designated public crossing. Do not cross the tracks immediately after a train passes. A second train might be blocked by the first. Trains can come from either direction.


When at a railroad or train crossing What should you do first?

Stop at least 15 feet, but not more than 50 feet, from nearest rail. Look both ways and listen carefully. Bend forward to see around mirrors and A-pillars.


What is the first warning of an approaching train at a crossing?

Advance warning signs The advance warning sign is a round, yellow sign bearing the lettering RXR. The X is very large, covering the full diameter of the sign. It is usually the first warning you will see that you are approaching a railroad crossing. Slow down, look and listen for an approaching train.


Where is the safest place on a train?

The safest spot in a train, during an accident, is the center of the train, said Mann, who was the principal author of the Federal Railway Safety Act in 1970. Because if there is a front-end collision or a rear-end collision, the damages will be greater at those locations.


When a train is approaching an intersection?

Flashing Red Lights — with or without bells When the red lights are flashing, a train is approaching. Stop and wait for the train to pass, then proceed when it is clearly safe to do so.