Why are trains so loud?

Rail corrugation (a periodic wear pattern resembling corrugated metal) causes tonal noise and vibration; fine, short-wavelength corrugation is known as roaring rails due to its high-pitched sound, whereas coarse, long-wavelength corrugation can cause the ground and nearby buildings to vibrate.



People Also Ask

The intensity of sound will vary at night, sometimes louder and sometimes softer. It has to do with the height and strength of a temperature inversion just above the ground. On clear, calm nights, it is cooler at the ground than higher up.

MORE DETAILS

Why do trains honk so loud at night? Train horns sound at the same volume whenever they are sounded. They often have minimum volume requirements, to ensure they can be heard far enough away for workers in a working environment to seek safety.

MORE DETAILS

If you hear, two small horns, it means the motorman is asking the guard to direct the railway signal to start the train. In case you hear three smaller horns, it suggests that the motorman has lost control over the train. This also acts as a signal to pull the vacuum break immediately. This signal is rarely heard.

MORE DETAILS

One short whistle means STOP. One long whistle (three to 10 seconds) means the train is approaching a station. Two short whistles mean that the engineer acknowledges that he or she heard or saw a signal that affects movement.

MORE DETAILS

Train Horn Requirements Under the Train Horn Rule (49 CFR Part 222, issued on August 17, 2006), locomotive engineers must begin to sound train horns at least 15 seconds, and no more than 20 seconds, in advance of all public grade crossings.

MORE DETAILS

Noise pollution and vibrations are some of the biggest concerns, particularly for people who live within one-third of a mile of railroads or railyards, says Natalia Caldeira Loss Vincens, an expert in public health at the University of Gothenburg in Sweden.

MORE DETAILS

Guests are asked to limit conversation and speak in subdued tones. Phone calls are not allowed and all portable electronic devices must be muted or used with headphones (passengers using headphones must keep the volume low enough so that the audio cannot be heard by other passengers).

MORE DETAILS

Train Speed. Most U.S. freight trains are only allowed to go 60 mph max. In suburban areas they often go slower. Test suggest that they create an average of about 85 db of noise (at close proximity).

MORE DETAILS

It is suggested in general that vibrations are not noticeable at distances over 300 m from the railway [23].

MORE DETAILS

While the US was a passenger train pioneer in the 19th century, after WWII, railways began to decline. The auto industry was booming, and Americans bought cars and houses in suburbs without rail connections. Highways (as well as aviation) became the focus of infrastructure spending, at the expense of rail.

MORE DETAILS

Anyway, don't blame the engineer: They're required to blow that horn. The regulation in question is called the Final Rule on the Use of Locomotive Horns—a name that strongly implies they've had just about enough of your bitching—and it requires four blasts 15 to 20 seconds before every crossing.

MORE DETAILS