Loading Page...

Why is there a 27 on the runway?

You might be thinking that the numbers on this diagram are backwards. On a handheld compass, south is 180 degrees (so 18 in runway terms) and west is 270 (27). But the “W” is numbered 9 because the runway number is connected to the direction the plane is traveling.



People Also Ask

Runway numbers are determined by rounding the compass bearing of one runway end to the nearest 10 degrees and truncating the last digit, meaning runways are numbered from 1 to 36—as per the diagram below. The opposite end of the runway always differs by 180 degrees, so it's numbered 18 higher or lower.

MORE DETAILS

For example, Runway 9-27 is oriented east-west. You might be thinking that the numbers on this diagram are backwards. On a handheld compass, south is 180 degrees (so 18 in runway terms) and west is 270 (27). But the “W” is numbered 9 because the runway number is connected to the direction the plane is traveling.

MORE DETAILS

As Atlas Obscura explains, the numbers that runways have aren't arbitrary. A runway always has a number between 1 and 36, and that number isn't just the runway's nickname, but also indicates how many degrees away that runway is from magnetic north, rounded to the tens.

MORE DETAILS

Runway 22 means that the airplane's magnetic heading on this runway will be about 220 degrees when taking off or landing. The actual heading may be 224 degrees, but it is called 22. If the actual heading was 226 degrees then the runway would be 23, or considered 230 degrees.

MORE DETAILS

Plainly put, airport runways are numbered according to compass bearings. This means runway numbers are based on the compass with 360 representing north, 90 representing east, 180 representing south, and 270 representing west. Runways are numbered between 01 and 36. Aerial view of a numbered airport runway.

MORE DETAILS

The opposite end of the runway always differs by 180 degrees, so it's numbered 18 higher or lower. For example, Runway 9-27 is oriented east-west. You might be thinking that the numbers on this diagram are backwards. On a handheld compass, south is 180 degrees (so 18 in runway terms) and west is 270 (27).

MORE DETAILS

Dallas Fort Worth International Airport Located between two major cities, the airport began operation in 1974, and features seven runways to service planes of varying sizes. This airport can also accommodate triple parallel landings.

MORE DETAILS

A runway always has a number between 1 and 36, and that number isn't just the runway's nickname, but also indicates how many degrees away that runway is from magnetic north, rounded to the tens. So runway 24 is 240 degrees from magnetic north, and runway 36 runs right along it.

MORE DETAILS

The extra length is needed in Denver's high elevation. Particularly for departures, larger, heavier planes need the additional space to get off the ground.

MORE DETAILS

Is There a Runway 0? You shouldn't find any runway numbered either “0” or “00”. Any runway which points to magnetic north will normally be given the designator “36” (as in 360 degrees). This will also correspond with the headings read out by both ATC and the pilot.

MORE DETAILS

Runways will be numbered based on their position so 06/24 means one end of our runway is 60 degrees, the opposite end is 240 degrees – so 180 degrees, also known as a straight line!

MORE DETAILS

Runway numbers are actually a reference to the closest magnetic heading of the runway. The runway heading is rounded to the nearest 10 degrees, and the zero is removed. This number is then assigned to the runway. Further differentiation can be achieved with letters on parallel runways.

MORE DETAILS

A runway can normally be used in both directions, and is named for each direction separately: e.g., runway 15 in one direction is runway 33 when used in the other. For clarity in radio communications, each digit in the runway name is pronounced individually. Airports with parallel runways.

MORE DETAILS

Since most runways are oriented to take advantage of prevailing winds to assist in takeoffs and landings, they can be used either direction. This is why most runways have two numbers. The second number differs by 18 or 180 degrees.

MORE DETAILS