Do you need to request approval to fly in Class B airspace?

Operating Rules and Pilot/Equipment Requirements. Regardless of weather conditions, an ATC clearance is required prior to operating within Class B airspace. Pilots should not request a clearance to operate within Class B airspace unless the requirements of 14 CFR Sections 91.131, 91.215, and 91.225 are met.



People Also Ask

To enter Class B airspace, all aircraft must meet the following requirements:
  • ATC clearance required to enter.
  • Establish and maintain two-way communication prior to entering and while in airspace.
  • Mode C transponder (within 30 nm, up to 10,000 feet msl)
  • Student pilot operations restricted.


MORE DETAILS

You may fly without ADSB under the Class B or Class C shelf provided you remain outside of any Mode C veil. §91.225 tells you where you cannot fly. It says you cannot fly within the lateral boundaries of the Class B or C airspace or above the airspace.

MORE DETAILS

You may fly without ADSB under the Class B or Class C shelf provided you remain outside of any Mode C veil. §91.225 tells you where you cannot fly. It says you cannot fly within the lateral boundaries of the Class B or C airspace or above the airspace.

MORE DETAILS

Many class B airspaces diverge from this model to accommodate traffic patterns or local topological or other features. The upper limit of class B airspace is normally 10,000 feet (3,000 m) MSL. All aircraft entering class B airspace must obtain ATC clearance prior to entry and must be prepared for denial of clearance.

MORE DETAILS

CBO operations and events occurring at 400 feet AGL and below in Class G airspace do not require FAA review, approval or authorization. CBO's intending to conduct events in Class G airspace that may exceed 400 feet AGL must contact the FAA for further information.

MORE DETAILS

VFR aircraft must obtain an ATC clearance to operate in Class B airspace.

MORE DETAILS

Once you are in the air, you must maintain communications with ATC while you are within Class B airspace. If you are taking off from a nontowered satellite airport within Class B airspace, establish two-way radio communications and get a squawk code from ATC as soon as possible after departure.

MORE DETAILS

Class B. Generally, from surface to 10,000 feet mean sea level (MSL) including the airspace from portions of Class Bravo that extend beyond the Mode C Veil up to 10,000 feet MSL (e.g. LAX, LAS, PHX)

MORE DETAILS

Download the FAA's safety app, which provides real-time information about airspace restrictions and other flying requirements based on your GPS location.

MORE DETAILS

An ATC clearance is required for all aircraft that receive separation services within the airspace. Even though you may be operating below the Bravo, you should use caution against operating too closely to the boundaries, especially where the floor of the Class B airspace is 3,000 feet or less above the surface.

MORE DETAILS

Class Bravo airspace (Class B) is that airspace surrounding the nation's busiest airports. Class B airspace supports both Instrument Flight Rules (IFR) and Visual Flight Rules (VFR) operations within.

MORE DETAILS

(c) No person may operate an aircraft in the airspace underlying a Class B airspace area designated for an airport or in a VFR corridor designated through such a Class B airspace area, at an indicated airspeed of more than 200 knots (230 mph).

MORE DETAILS