The split sleeper berth rule allows drivers to split the required 10 consecutive hours of off-duty time into two shifts in order to extend the shift.
People Also Ask
Sleeper Berth ProvisionDrivers may split their required 10-hour off-duty period, as long as one off-duty period (whether in or out of the sleeper berth) is at least 2 hours long and the other involves at least 7 consecutive hours spent in the sleeper berth. All sleeper berth pairings MUST add up to at least 10 hours.
According to FMCSA regulations, drivers are required to take a 30-minute break if more than 8 hours have passed since their last off duty period or sleeper berth period. This break can be taken in segments, as long as it adds up to a total of at least 30 minutes.
It's important to note that off duty time is distinct from sleeper berth time. While off duty time is spent away from the commercial motor vehicle (CMV), sleeper berth time refers to the period when a driver rests or sleeps in the sleeper berth compartment of the CMV as defined in sect 393.76 Sleeper berths .
Up to 3 hours in the passenger seat of a moving commercial motor vehicle, immediately before or after 7-consecutive hours in the sleeper berth, can be logged as off-duty time for a 10-consecutive hour break.
This means that you are not allowed to drive a commercial motor vehicle after you've been on duty 70 hours in any 8 consecutive days. Once you reach the 70-hour limit, you will not be able to drive again until you have dropped below 70 hours for an 8-consecutive-day period.