How fast did the first trains go?

1814 - George Stephenson constructs his first locomotive, Blücher for the Killingworth wagonway. The locomotive was modelled on Matthew Murray's. It could haul 30 tons of coal up a hill at 4 mph (6.4 km/h) but was too heavy to run on wooden rails or iron rails which existed at that time.



People Also Ask

Faster inter-city trains: 1920–1941 Rail transportation was not high-speed by modern standards but inter-city travel often averaged speeds between 40 and 65 miles per hour (64 and 105 km/h).

MORE DETAILS

By 1863 a quarter of the South's locomotives needed repairs and the speed of train travel in the South had dropped to only 10 miles an hour (from 25 miles an hour in 1861). Fuel was a problem as well. Southern locomotives were fueled by wood--a great deal of it.

MORE DETAILS

Locomotives and tracks began to wear out. By 1863 a quarter of the South's locomotives needed repairs and the speed of train travel in the South had dropped to only 10 miles an hour (from 25 miles an hour in 1861). Fuel was a problem as well. Southern locomotives were fueled by wood--a great deal of it.

MORE DETAILS

In 1870 it took approximately seven days and cost as little as $65 for a ticket on the transcontinental line from New York to San Francisco; $136 for first class in a Pullman sleeping car; $110 for second class; and $65 for a space on a third- or “emigrant”-class bench.

MORE DETAILS

Around 20 to 30 miles per hour. Track on the Western frontier was laid in a hurry and usually pretty rough, and the wooden passenger and freight cars of the time weren't designed to handle the vibration of high speeds.

MORE DETAILS

The BB 9200 hauled Le Capitole at 200 km/h. After the successful introduction of the Japanese Shinkansen in 1964, at 210 km/h (130 mph), the German demonstrations up to 200 km/h (120 mph) in 1965, and the proof-of-concept jet-powered Aérotrain, SNCF ran its fastest trains at 160 km/h (99 mph).

MORE DETAILS

In 1934, Flying Scotsman achieved the first authenticated 100 mph (161 km/h) by a steam locomotive.

MORE DETAILS

Most Shinkansen trains operate at speeds of about 500 kilometers per hour (200 to 275 miles per hour). As new technologies are developed and instituted, future trains may achieve even greater velocities.

MORE DETAILS

Some travelers continued to take wagons over the old trail as late as the 1920s. Why? Usually because they didn't have the money to buy train tickets to take their families west, or they had livestock that needed herding along, but sometimes just because they loved the old-timey adventure of it.

MORE DETAILS

Accidents were compounded by running trains in both directions on single tracks and hasty and cheap trestle construction. In 1875, there were 1,201 train accidents. Five years later, in 1880, that rate had increased to 8,216 in one year.

MORE DETAILS

By 1860, 30,000 miles (49,000 km) of railroad tracks had been laid, with 21,300 miles (34,000 km) concentrated in the northeast. The Baltimore and Ohio railroad was the first chartered railroad in the United States and was built to increase the flow of goods between Baltimore and Ohio.

MORE DETAILS

0 series: The first Shinkansen trains which entered service in 1964. Maximum operating speed was 220 km/h (135 mph). More than 3,200 cars were built.

MORE DETAILS

What's faster than a speeding bullet, a phrase used to describe Superman? The new Shinkansen, or Japanese bullet train. Japan Rail announced the design of a magnetic levitation train that will achieve speeds over 600 kilometers per hour (374 miles per hour), or 1 mile (1.5km) every 10 seconds.

MORE DETAILS

Because friction is the enemy of rail transportation, a key engineering principle is to keep grades low and curves to a minimum. As a result, the best routes across the continent often followed the natural courses of water.

MORE DETAILS