What happens if you touch subway tracks?

If you touch it for long enough, you get run over by a train. If the subway operates a 3rd or 4th rail system and you touch one of the conductor rails, you get a potentially lethal electric shock, and then your smoking corpse probably gets run over by train. In short: it's not something you'd ever want to do.



People Also Ask

Standing upon (or making bodily-contact with) both wheel-rails of a railroad line simultaneously would almost-certainly not result in a life-threatening (nor even mild) electrical-shock of any sort (they are grounded and almost never carry any more than a few stray, harmless volts of electricity, if any).

MORE DETAILS

If you touched the live third rail and any one of the others, or to the ground, yes. It's not only at a high voltage, but it's also DC which has the effect on your muscles of clamping on so you can't move. At least AC is at zero Volts every so often... But between the two normal rails probably not.

MORE DETAILS

Many trains operate solely on electrical power. They get the electricity from a third rail, or electrical line, which is present along the track. Transformers transfer the voltage from the lines, and the electrical current enables the motors on the wheels to move.

MORE DETAILS

The metaphor comes from the high-voltage third rail in some electric railway systems. This third rail, used to power trains, usually results in the death by electrocution of anyone who comes into direct contact with it.

MORE DETAILS

This is why birds do not die from landing on power lines, and subway rats do not get electrocuted even if they run across the third rail; they are not bridging the energized wire or rail to a grounded part of the structure.

MORE DETAILS

What happens if you stand too close to a train? Air between person and the train moves with high velocity due to dragging effect and the air behind person is approximately still.

MORE DETAILS

What can stop a train in real life? The most common way is to use the brakes. The brakes are located on each wheel of the train and are applied by the train engineer. The engineer can apply the brakes manually or automatically.

MORE DETAILS

“People assume that trains are loud, but that assumption is based on the fact that when a train's gone past them in a station it's noisy. That's because the noise a train makes is mainly projected to either side. When trains are moving directly towards you they are barely audible–until it's too late.”

MORE DETAILS

It's Illegal Trespassing onto railroad property, including tracks, bridges, buildings and signal towers, is illegal. Violators are subject to a citation for trespassing. Union Pacific will seek removal from publication any photograph or video that violates this policy.

MORE DETAILS

Freight and passenger railroad cars and locomotives have flanges on the inside of the wheel. The inside of the wheel has a larger diameter than the outside. The flange keeps the wheels on the track. The same principle is used on model railroads and most toy trains.

MORE DETAILS

According to the National Transportation Safety Board (NTSB), since 1975, there has been an average of 1.3 train accidents per year involving fatalities. Compare that with 2,584 aviation accidents and 700 bus accidents over the same time period.

MORE DETAILS

Compared to other popular forms of travel, such as cars, ships, buses, and planes, trains are one of the safest forms of transportation in the United States.

MORE DETAILS

Truck crashes tend to be local and less dramatic than a pile of derailed train cars on fire, even if they're deadlier. In fact, federal data shows that rail has had far fewer incidents, deaths and damage when moving hazardous materials in the U.S. than trucks.

MORE DETAILS

Federal regulators limit the speed of trains with respect to the signaling method used. Passenger trains are limited to 59 mph and freight trains to 49 mph on track without block signal systems. (See dark territory.)

MORE DETAILS

DC motors are used on trains is because of their high torque and good speed control. Compared to AC motors, DC motors can provide industry applications with a fine balance of strong starting torque and controllable speed for seamless yet precise performance.

MORE DETAILS

In rail transport, a derailment occurs when a rail vehicle such as a train comes off its rails. Although many derailments are minor, all result in temporary disruption of the proper operation of the railway system and they are a potentially serious hazard.

MORE DETAILS