Most airlines have a different fare class for each letter of the alphabet, and this varies by airline: F is first class, C and J are typically business class, and Y is usually economy, regardless of the airline.
People Also Ask
C - Business Class. D - Business Class Discounted. E - Shuttle Service (no reservation allowed) or Economy/Coach Discounted. F - First Class.
Traditionally, an airliner is divided into, from the fore to aft, first, business, and economy classes, sometimes referred to as cabins. In recent years, some airlines have added a premium economy class as an intermediate class between economy and business classes.
Most Class C airports are home to flight schools and small aircraft hangars as well as scheduled service by airlines. While still busy, Class C airports have less traffic than Class B, so ATC doesn't need as much space to keep them organized. Like Class B, approach control services are provided.
The ceiling of a Class C airspace should be 4,000 feet above the primary airport's field elevation. The surface area extends from the surface to the upper limit of the airspace. The floor of the airspace between the 5 and the 10 NM must extend from no lower than 1,200 feet AGL to the upper limit of the airspace.
Can we fly over it? Technically yes, BUT it's still a very bad idea because a motor out would force you to descend through the Class C airspace. We CAN'T fly here without special permission from ATC. Permission should be obtained in advance by telephone (some controllers will accept a radio call).
Unless otherwise authorized or required by ATC, no person may operate an aircraft at or below 2,500 feet above the surface within 4 nautical miles of the primary airport of a Class C airspace area at an indicated airspeed of more than 200 knots (230 mph).
Because Kennedy, LaGuardia, and Newark are so close, the Class B airspace for the three airports overlaps. Class B airspace is often described as an upside-down wedding cake (see accompanying picture). The top of the airspace is 7,000 feet above sea level for New York's Class B.
Economy Class cabins are broken down into two categories. “Regular Economy” and “Premium Economy.” Economy Class seating is the most basic of accommodations.
Passengers that fly First class can expect a superior experience with plenty of legroom, reclining seats, meal choices, full bar service or bartender, in-flight entertainment and Wi-Fi. It is a very comfortable and luxurious experience for each passenger who gets personal attention from flight staff.
Class C Airspace (Mandatory Radar)A shelf area with an outer radius of 10 nautical miles surrounds the core area. It extends from 1200 feet AGL to 4000 feet AGL. The airspace is depicted on charts as 2 concentric magenta circles. For example, an airport with a surface altitude of 500 feet MSL is depicted above.
You must receive official clearance. Also, pilots must hold a minimum of a private pilot certification to enter Class B airspace. Sport pilots, recreational pilots, and student pilots are not authorized to operate in Class B airspace.
Class C ArrivalIf you are not receiving flight following, around 20NM from the airport and prior to entering Class C airspace contact approach control on the frequency listed on your VFR chart. On initial contact you should provide your callsign, location, altitude, request, and the ATIS code.
However, if you wish to operate in class A, B, or C airspace, or at an altitude of over 10,000' MSL, or within a 30 nautical mile radius of the primary airport in class B airspace, you will need a transponder and altitude encoder (commonly referred to as mode C).
Unless otherwise authorized or required by ATC, no person may operate an aircraft at or below 2,500 feet above the surface within 4 nautical miles of the primary airport of a Class C airspace area at an indicated airspeed of more than 200 knots (230 mph).