What steps will you take when crossing railroad tracks quizlet?
When approaching a railroad crossing, you should:
Increase your speed to get across the tracks as quickly as possible.
Roll your window down to listen for a train.
Rely on traffic control signals.
Never try to outdrive an approaching train.
People Also Ask
Railroad Crossing SignalsFlashing red lights, lowered crossing gates and/or a bell at a railroad crossing indicate that you must stop, at least 15 feet (5 m) from the tracks.
Expert-Verified Answer. The appropriate action to take when approaching a railroad crossing that does not have signals to direct traffic is Slow down and be prepared to stop.
If the lights begin to flash or the bells begin to ring, STOP! A train is coming. You must yield to the train and remain stopped until the lights have stopped flashing and the gates have lifted.
Be especially alert at crossings that do not have gates or flashing red light signals. train on the other track. Look both ways before crossing. After one train has cleared a crossing, be sure no other trains are near before starting across the tracks.
Advance warning signsThe advance warning sign is a round, yellow sign bearing the lettering RXR. The X is very large, covering the full diameter of the sign. It is usually the first warning you will see that you are approaching a railroad crossing. Slow down, look and listen for an approaching train.
If you are caught between adjacent lines and you are unable to reach a position of safety when trains are approaching in both directions, what must you do? Lay down in the 6 foot with arms by your side and all loose clothing tucked in.
Stop at least 15 feet, but not more than 50 feet, from nearest rail. Look both ways and listen carefully. Bend forward to see around mirrors and A-pillars.
Reduce your speed when approaching crossings and look both ways. Look and listen for trains even if the red lights and crossing arms aren't active. Reduce speed when approaching crossings and look both ways. Be sure all tracks are clear before crossing — there may be more than one set.
A level crossing is an intersection where a railway line crosses a road, path, or (in rare situations) airport runway, at the same level, as opposed to the railway line crossing over or under using an overpass or tunnel.