When approaching a railway crossing it is important to consider what?

Steps for Navigating Crossings Stop, look both ways, and listen. Know that trains always have the right of way. Don't stop on the tracks. Make sure you have room to get across.



People Also Ask

Stop at least 15 feet, but not more than 50 feet, from nearest rail. Look both ways and listen carefully. Bend forward to see around mirrors and A-pillars.

MORE DETAILS

Safety Tips for Drivers Turn on your four-way flashers to warn other drivers that you are slowing down. Then, turn off any fans and music, and roll down your windows as you come to the track. Try to come to a complete stop between 15 and 50 feet away. Cross tracks only at designated crossings.

MORE DETAILS

When you need to cross train tracks, go to a designated crossing, look both ways, and cross the tracks quickly, without stopping. Remember it isn't safe to stop closer than 15 feet from a rail. ALWAYS EXPECT A TRAIN! Freight trains do not follow set schedules.

MORE DETAILS

7 Steps for Safety - Highway-Rail Grade Crossings (Visor Card)
  1. Approach with care. Warn others that you are slowing down. ...
  2. Prepare to stop. ...
  3. Look both ways and listen carefully. ...
  4. If it won't fit, don't commit. ...
  5. Look again. ...
  6. Cross tracks with care. ...
  7. Keep going once you start, even if lights start to flash or gates come down.


MORE DETAILS

Expert-Verified Answer. The appropriate action to take when approaching a railroad crossing that does not have signals to direct traffic is Slow down and be prepared to stop.

MORE DETAILS

Advance warning signs The advance warning sign is a round, yellow sign bearing the lettering RXR. The X is very large, covering the full diameter of the sign. It is usually the first warning you will see that you are approaching a railroad crossing. Slow down, look and listen for an approaching train.

MORE DETAILS

Stop, look both ways, and listen. Know that trains always have the right of way. Don't stop on the tracks. Make sure you have room to get across.

MORE DETAILS

Do not walk, run, cycle or operate all terrain vehicles (ATVs) on railroad tracks, rights-of-way or through tunnels. The only safe place to cross railroad tracks is at a designated public crossing. Do not cross the tracks immediately after a train passes. A second train might be blocked by the first.

MORE DETAILS

As you approach a railroad crossing, you must:
  1. Slow your speed.
  2. Look both ways.
  3. Listen for the train.
  4. Keep alert.
  5. Watch for the railroad crossing signal.


MORE DETAILS

Flashing red lights warn of an approaching train and must be treated like a stop sign. If there are no gates, drivers are required to stop and may proceed only when it is safe to do so. Remember, trains always have the right-of-way.

MORE DETAILS

If the lights begin to flash or the bells begin to ring, STOP! A train is coming. You must yield to the train and remain stopped until the lights have stopped flashing and the gates have lifted.

MORE DETAILS