Why do trains stop in the middle of nowhere?

Nearly always it's for operational reasons - a signal at danger (train ahead or converging at a junction on the other route) or if on a single track line, the train may have entered a crossing loop and is scheduled to pass another train heading in the opposite direction.



People Also Ask

“Trains may need to stop while waiting for other trains to pass, to cross over another railroad's track or to enter a rail yard. Dropping off or picking up train cars from rail yards or industrial plants is another reason why trains may be stopped on the tracks.

MORE DETAILS

One reason could be: waiting for the arrival of another train to pass or waiting to enter to a rail yard. Sometimes, the trains can stop in the middle because of technical or mechanical problems with locomotives or picking or dropping off the freight cars at the industrial tracks.

MORE DETAILS

Trains can't stop quickly or swerve. The average freight train is about 1 to 1¼ miles in length (90 to 120 rail cars). When it's moving at 55 miles an hour, it can take a mile or more to stop after the locomotive engineer fully applies the emergency brake.

MORE DETAILS

The reason that trains honk their horns so much at night is because it's dark and the trains aren't so easy to see. Even though the lights are on, we sometimes can't see them coming, especially around the many blind curves near or ahead of the train station.

MORE DETAILS

Trains have the right-of-way because they cannot quickly stop for a motorist at crossings or for trespassers on the tracks. The average freight train, traveling at 55 MPH, takes anywhere from 1 to 1½ miles to stop. Traveling at the same speed, the average automobile can stop in only 200 feet.

MORE DETAILS

Locate the blue Emergency Notification System (ENS) sign at the crossing to contact the railroad for emergencies. Use this form to report when a train is blocking a highway-rail grade crossing. Please report only once for each blocked crossing.

MORE DETAILS

Under the Train Horn Rule (49 CFR Part 222, issued on August 17, 2006), locomotive engineers must begin to sound train horns at least 15 seconds, and no more than 20 seconds, in advance of all public grade crossings.

MORE DETAILS

So, as you can see from the name, all this honking business is pretty strict and obliges trains to make four blasts approximately 20 seconds before they reach a crossing. But that's not all! Trains whistles and horns are an effective method of communication!

MORE DETAILS

If you hear, two small horns, it means the motorman is asking the guard to direct the railway signal to start the train. In case you hear three smaller horns, it suggests that the motorman has lost control over the train. This also acts as a signal to pull the vacuum break immediately. This signal is rarely heard.

MORE DETAILS

Two short whistles mean that the engineer acknowledges that he or she heard or saw a signal that affects movement. Three short ones mean that the engineer intends to make a reverse movement. Two long, one short and one long mean trains are approaching a highway or street crossing. And the list goes on.

MORE DETAILS

One long whistle (three to 10 seconds) means the train is approaching a station.

MORE DETAILS

By the time a train operator sees you, it is too late to stop the train in time. An oncoming train is moving faster and is closer to you than it appears. Similar to an airplane traveling at 150 mph that appears to float onto the runway, it's hard to determine a train's speed and distance from you.

MORE DETAILS