When approaching a railroad crossing you must look at least how many feet down the tracks in each direction before crossing?

If there is more than one track, make sure all tracks are clear before crossing. Do not continue through the railroad crossing until it is clear, and the lights stop flashing. Remember that flashing red lights at a railroad crossing always mean to stop completely and immediately at least 15 feet before the tracks.



People Also Ask

Freight and Commuter Trains Don't stop on the tracks. Make sure you have room to get across. Once you enter the crossing, keep moving. Stop 15 feet away from flashing red lights, lowered gates, a signaling flagman or a stop sign.

MORE DETAILS

Except in cities or towns, whenever any person driving a vehicle approaches a railroad grade crossing under any of the circumstances stated in this section, the driver of the vehicle shall stop within 50 feet but not less than 15 feet from the nearest rail of such railroad, and shall not proceed until he can do so ...

MORE DETAILS

Look both ways, lean forward to see around mirrors to get the best view of the tracks in both directions. Using the highest gear allowed, cross with care and without shifting gears. Time your crossing safely and account for the extra length of your vehicle to cross all of the tracks safely.

MORE DETAILS

When you need to cross train tracks, go to a designated crossing, look both ways, and cross the tracks quickly, without stopping. Cross tracks only at designated pedestrian or roadway crossings. Never walk down a train track; it's illegal and it's dangerous. Remember: Rails and recreation do not mix!

MORE DETAILS

The simplest way to keep a safe following distance is to follow the 3-second rule. When the vehicle in front of you passes a fixed object down the road, such as a sign or other landmark, start counting to three. (Make sure you're counting properly; count one-1,000, two-1,000, three-1,000.)

MORE DETAILS

Steps for Navigating Crossings Stop, look both ways, and listen. Know that trains always have the right of way. Don't stop on the tracks. Make sure you have room to get across.

MORE DETAILS

WHEN Stephenson was building the Stockton to Darlington railway, he decided on the gauge by measuring the axle width of 100 farm wagons and taking the average, the result being 4ft 8 in. He may have intended to allow local people to use the track to convey goods with their own wagons.

MORE DETAILS

The US standard railroad gauge is 4 feet, 8.5 inches (Gauge means width between the two rails).

MORE DETAILS

Trains can come from either direction. Wait until you can see clearly around the first train in both directions. Never walk around or behind lowered gates at a crossing. Do not cross the tracks until the lights have stopped flashing and it is safe to do so.

MORE DETAILS